Configuring the Gateway on the Client Computer
If your client computer has an IP address specified to it, its gateway configuration should be as follows:
Windows NT 4 (workstation/server)
From below select the operating system that represents your client computer:
Windows NT 4 (workstation/server)
Windows 95 TCP/IP Setup
1. Click on Control Panel -> Network. Under the Configuration tab, click on "TCP/IP for the LAN Adapter" -> Properties.
- Under the IP Address tab,you will have "Specify an IP address" selected. Below is a screenshot example.
- Under the Gateway tab, enter in the internal IP address of the WinProxy computer.
2. Click OK -> OK, then reboot/restart your operating system.
Windows 98 TCP/IP Setup
1. Click on Control Panel -> Network. Under the Configuration tab, click on "TCP/IP for the LAN Adapter" -> Properties.
- Under the IP Address tab, you will have "Specify an IP address" selected. Below is a screenshot example.
- Under the Gateway tab, enter in the internal IP address of the WinProxy computer.
2. Click OK -> OK, then reboot/restart your operating system.
Windows NT 4.0 TCP/IP Setup
1. Click on Control Panel -> Network -> Protocols. Under the Protocols tab, hi-lite TCP/IP Protocol and click on Properties.
- Under the IP Address tab, you will have "Specify an IP address" selected.
- Next to Default Gateway, you should enter in the internal IP address of the WinProxy computer.
2. Click OK -> OK, then reboot/restart your operating system.
